What to do if POD leaks?

What to do if POD leaks? – POD leaks are one of the most common problems experienced by vape users. This leak can occur in various types of POD, both open system POD and closed system POD. POD leaks can be caused by a variety of factors, ranging from user error to manufacturing defects.

If your POD is leaking, there are several things you can do to fix it. Here are some tips you can follow:

1. Check battery power

One of the causes of POD leaks is a battery that is not fully charged. When the battery is not fully charged, the coil cannot be heated optimally. This can cause the liquid to become too hot and overflow out of the POD.

To overcome this, make sure your POD battery is fully charged before use. You can check the battery indicator on the POD or charger.

2. Use the right liquid

Liquid that does not match the POD can cause leaks. Liquid that is too thick or too thin can cause the coil to clog or leak.

To overcome this, use a liquid that matches your POD specifications. You can read the instructions for using POD to find out the recommended type of liquid.

3. Fill with enough liquid

Filling the liquid too full can also cause leaks. When the liquid is too full, the liquid can overflow out of the POD when you draw in steam.

To overcome this, fill in enough liquid to the specified limit. You can see the liquid filling limit on the POD.

4. Check the cartridge seal

Cartridge seals that are damaged or not installed tightly can cause leaks. The cartridge seal functions to prevent liquid from leaking out of the POD.

To fix this, check your POD cartridge seal. If the cartridge seal is damaged, then you need to replace it with a new one.

5. Clean the POD regularly

Accumulation of liquid and dirt on the POD can cause leaks. Dirt stuck in the coil or air hole can cause the coil to clog and leak.

To overcome this, clean the POD regularly. You can use a soft cloth or tissue to clean the inside of the POD.

6. Replace the cartridge

If you have done all the steps above, but your POD is still leaking, then it is possible that your POD cartridge is damaged. A damaged POD cartridge generally cannot be repaired and must be replaced with a new one.

To replace the POD cartridge, you can buy it at the nearest vape shop.

Additional tips to prevent POD leaks

Apart from the tips above, you can also do the following things to prevent POD leaks:

Avoid dropping or hitting the POD.
Do not store PODs in hot or damp places.
Do not use the POD if the battery is very low.

By following the tips above, you can reduce the risk of POD leaks and keep your PODs long-lasting.

Read Also : Coil Vape Terbuat Dari Apa?

Here are some steps you can take to address POD leaks directly:

Unplug the POD from the battery

The first thing you should do is disconnect the POD from the battery. This aims to prevent liquid leaking into the battery.

Clean the leaking liquid

Use a tissue or soft cloth to clean the leaking liquid. You can also use a vacuum cleaner to clean liquid in hard-to-reach areas.

Check the cartridge seal

Check your POD cartridge seals to see if they are damaged or not installed tightly. If something is damaged, then you need to replace it with a new one.

Fill with enough liquid

Fill enough liquid to the specified level. You can see the liquid filling limit on the POD.

Reinstall the POD

Once you have finished cleaning and repairing the POD, you can reattach the POD to the battery.

If you have done the steps above, but your POD is still leaking, then it is possible that your POD is damaged. You can try replacing the POD cartridge first. If the new POD cartridge also leaks, then your POD is likely damaged and must be replaced with a new one.